|
|
Boiler Buddy
Price: £104.00 (£124.80 Including VAT at 20%)
High efficiency magnetic filter
· Removes magnetite, rust and magnetic materials from heating systems to sub-micron level
· Unique opportunity for condition monitoring of central heating systems
· No pressure or flow drop, even when the filter is completely full
· Magnetite trapped with no wash-off
· Simple to connect
· Slots into existing circulator position when replacing a conventional with a condensing boiler
· Easy to remove for cleaning
· Compatible with all Fernox Restorers, Protectors and Cleaners
|
F1 Protector - Limescale & Corrosion Protector
Price: £14.95 (£17.94 Including VAT at 20%)
Central Heating Protector F1 for mixed-metal domestic central heating systems
· Protects against corrosion and limescale
· Prevents boiler noise
· Stops frequent venting of radiators
· Extends system life
· Prevents sticking pumps
|
F1 Super Concentrate
Price: £22.49 (£26.99 Including VAT at 20%)
As above -
One pack (290 ml) will protect an average sized system (up to ten radiators) and is added via one of the radiators. A standard mastic gun is used to dose the Fernox Superconcentrate directly into a radiator air-vent using the special adapter supplied with the product. The entire process can be completed in less than five minutes!
|
F2 Boiler Noise Silencer - Reduces Boiler Noise
Price: £14.97 (£17.96 Including VAT at 20%)
· Reduces boiler noise
· Improves heat transfer efficiency
· Compatible with all Fernox corrosion Protectors
· Non-toxic, environmentally friendly
· Can be left in the system permanently
· Compatible with all metals and materials commonly used in central heating systems
|
F2 Super Concentrate
Price: £20.99 (£25.19 Including VAT at 20%)
As Above -
One pack is usually sufficient to treat a typical central heating system and is added via one of the radiators. Too much treatment will not cause problems and is preferable to insufficient dosing. Severe noise may require more than one application.
A standard mastic gun is used to dose Fernox Superconcentrate Boiler Noise Silencer F2 directly into a radiator air-vent using the special adapter supplied with the product. The entire process can be completed in less than five minutes!
|
F3 Cleaner - Removes Sludge & Debris
Price: £13.97 (£16.76 Including VAT at 20%)
· Removes sludge and scale and restores heating efficiency of existing systems
· Removes flux residues and other debris
· Compatible with all metals and materials commonly used in heating systems
· Easy to use, system can be left running normally during cleansing
· Suitable for use with all known powerflushing machines
|
F3 Super Concentrate
Price: £20.99 (£25.19 Including VAT at 20%)
As Above -
A standard mastic gun is used to dose Fernox Superconcentrate Cleaner F3 directly into a radiator air-vent using the special adapter supplied with the product. The entire process can be completed in less than five minutes!
One 290 ml cartridge of Cleaner F3 is usually sufficient to clean an average sized system (up to ten radiators) and is added via one of the radiators. Additional/repeat applications of Cleaner F3 may be necessary, for large systems or if systems are heavily sludged.
|
F4 - Leak Sealer - Stops Small Leaks
Price: £12.99 (£15.59 Including VAT at 20%)
Ideal for reducing pressure loss from sealed systems
· Seals most weeps and small inaccessible leaks
· Saves time and money on draining down and repairing
· Does not cause blockages of pump, air vents etc.
· Compatible with all metals and materials commonly used in central heating systems
|
F4 Super Concentrate
Price: £20.99 (£25.19 Including VAT at 20%)
As Above -
One pack will treat an average sized system (up to ten radiators) and is added via one of the radiators.
A standard mastic gun is used to dose the Fernox Leak Sealer F4 directly into a radiator air-vent using the special adapter supplied with the product. The entire process can be completed in less than five minutes!
|
LSX
Price: £3.49 (£4.19 Including VAT at 20%)
External leak sealer - 50ml tube
· Ideal for use on compression joints and screwed fittings
· Never sets rock hard, joints can easily be undone
· Ready to use, no mixing
· Does not shrink or crack with age
· Suitable for use from below freezing point to above boiling point of water
· Completely safe to use with drinking water
|
Alphi11
Price: £23.95 (£28.74 Including VAT at 20%)
Renders water non-corrosive to steel, cast iron, copper, brass and aluminium
· Combined antifreeze and inhibitor
· Prevents limescale build-up
· Compatible with all metals and materials commonly used in heating systems
· Prevents bacterial contamination
· Non-toxic, environmentally friendly
· Protects heating, chilled water and solar systems
|
