|
|
FLUE ADAPTOR
Price: £15.54 (£18.65 Including VAT at 20%)
Used to connect appliance flue outlets or
vertical or horizontal single-wall flues to
insulated chimneys.
Secured with a Locking Band.
|
5"/120mm Pipe Length
Price: £42.00 (£50.40 Including VAT at 20%)
Flue lengths are easy to assemble and can be combined to obtain the required installation height.
Secured with a Locking Band.
|
12"/300mm Pipe Length
Price: £69.63 (£83.56 Including VAT at 20%)
Flue lengths are easy to assemble and can be combined to obtain the required installation height.
Secured with a Locking Band.
|
20"/500mm Pipe Length
Price: £81.54 (£97.85 Including VAT at 20%)
Flue lengths are easy to assemble and can be combined to obtain the required installation height.
Secured with a Locking Band.
|
40"/1000mm Pipe Length
Price: £144.19 (£173.03 Including VAT at 20%)
Flue lengths are easy to assemble and can be combined to obtain the required installation height.
Secured with a Locking Band.
|
200-325mm Adjustable Pipe Length
Price: £73.11 (£87.73 Including VAT at 20%)
A telescopic section designed to provide small
increments in lengths between two fi xed points.
200-325mm
Secured with a Locking Band.
|
350-530mm Adjustable Pipe Length
Price: £86.07 (£103.28 Including VAT at 20%)
A telescopic section designed to provide small
increments in lengths between two fi xed points.
350-530mm
Secured with a Locking Band.
|
Locking Band
Price: £9.45 (£11.34 Including VAT at 20%)
Used at all joints between chimney lengths or
lengths and fittings.
|
90 Deg Tee
Price: £151.78 (£182.14 Including VAT at 20%)
Used at base of vertical chimney. Can be used on
the base or branch to provide access.
Secured with a Locking Bands.
|
Locking Plug
Price: £22.58 (£27.10 Including VAT at 20%)
Used to seal and provide access on a female
connection of a length or fi tting.
Secured with a Locking Band.
|
15 deg Elbow
Price: £95.13 (£114.16 Including VAT at 20%)
Used to provide offsets or bends
Secured with a Locking Band.
|
30 deg Elbow
Price: £95.13 (£114.16 Including VAT at 20%)
Provides a 30° bend; or, by using two
components, a 60° or variable offset bend can
be obtained
Secured with a Locking Band.
|
45 deg Elbow
Price: £95.13 (£114.16 Including VAT at 20%)
Provides a 45° bend; or, by using two
components, a 90° or variable offset bend can
be obtained
Secured with a Locking Band.
|
Rain Cap
Price: £30.88 (£37.06 Including VAT at 20%)
Secured with a Locking Band.
|
Gas Terminal
Price: £42.80 (£51.36 Including VAT at 20%)
This component is for use where the system
is used on gas fired appliances Secure with a
Locking Band.
|
Ceiling Support
Price: £26.91 (£32.29 Including VAT at 20%)
Provides a 50mm air gap clearance to a
penetrated floor or ceiling and is only used
where SMW penetrates a non-combustible
fl oor, and/or serves a gas or oil fired appliance
where flue gas temperatures do not exceed
250°C.
|
Firestop Spacer
Price: £5.24 (£6.29 Including VAT at 20%)
Used to provide location, fi re and dust stopping
where SMW is used through non-combustible
and combustible floors when serving gas
or oil fired appliances ONLY with a flue
gas temperature not exceeding 250°C. These
components are supplied singly but are usually
used in pairs and are not Load bearing.
|
Storm Collar
Price: £12.14 (£14.57 Including VAT at 20%)
Used as a weathering over fl ashing and
supplied with sealant.
|
Seldek Flashing Flat - 45 Deg
Price: £22.65 (£27.18 Including VAT at 20%)
Type2
|
Seldek Flashing Flat - 40 Deg
Price: £43.91 (£52.69 Including VAT at 20%)
Type3
|
Wall Band
Price: £6.55 (£7.86 Including VAT at 20%)
Used for lateral support with no more than
3.0m externally and 3.5m internally between
centres. The galvanised wall band is intended
for internal applications only, whereas the
stainless steel version can be used for both
internal and external applications
|
