|
|
6" /152mm Pipe Length
Price: £7.27 (£8.72 Including VAT at 20%)
Installed effective length is 38mm less then ststed actual length
|
12" / 305mm Pipe Length
Price: £11.04 (£13.25 Including VAT at 20%)
Installed effective length is 38mm less then ststed actual length
|
18" / 457mm Pipe Length
Price: £12.18 (£14.62 Including VAT at 20%)
Installed effective length is 38mm less then ststed actual length
|
36" / 914mm Pipe Length
Price: £21.83 (£26.20 Including VAT at 20%)
Installed effective length is 38mm less then ststed actual length
|
60" / 1524mm Pipe Length
Price: £31.50 (£37.80 Including VAT at 20%)
Installed effective length is 38mm less then ststed actual length
|
12" / 305mm Adjustable Pipe Length
Price: £13.88 (£16.66 Including VAT at 20%)
Installed effective length is 38mm less then ststed actual length
|
18" / 457mm Adjustable Pipe Length
Price: £18.80 (£22.56 Including VAT at 20%)
Installed effective length is 38mm less then ststed actual length
|
90 Deg Adjustable Elbow
Price: £15.94 (£19.13 Including VAT at 20%)
Provides variable angles or offset to
be made but must not be used to
exceed 45° from the vertical
|
Equal Tee
Price: £35.36 (£42.43 Including VAT at 20%)
A Tee cap is supplied.
|
Increaser 4"-5"
Price: £17.36 (£20.83 Including VAT at 20%)
|
Adaptor to flexible flue liner
Price: £12.02 (£14.42 Including VAT at 20%)
Lower end of this all aluminium
component connects to standard
product, upper end fits over fibre
cement flue liner. Also used to
connect to flexible flue liner.
|
Flexible liner to IL Connector
Price: £12.02 (£14.42 Including VAT at 20%)
Designed to be secured into the top of
a stainless steel flexible flue liner at
the point where the liner exits an
existing masonry, or similar chimney.
Connection would normally be in the
roof space, and the IL Gas Vent
continues to termination in the normal
|
Draughthood Connector
Price: £4.99 (£5.99 Including VAT at 20%)
This component must be used to
connect the system to an appliance
spigot and also where the system is
connected to a Transfer or Adaptor
block for a BS 1289 Flue Block system.
It cannot be used as a substitute for
the Adaptor to Flue Liner.
|
Support Plate
Price: £8.62 (£10.34 Including VAT at 20%)
Used to support vents at floor
penetrations in conjunction with the
Support Flange (supplied).
|
Firestop Spacer
Price: £3.38 (£4.06 Including VAT at 20%)
Used at floor or ceiling pentration or
in conjunction with the Support Plate
to maintain the required clearance to
combustible materials
|
Wall Band
Price: £7.82 (£9.38 Including VAT at 20%)
Use at intervals not exceeding 3m to
provide lateral support. If used
externally, the galvanised component
will require suitable weather
protection.
|
Stand Off Wall Bracket
Price: £7.46 (£8.95 Including VAT at 20%)
Made from galvanised steel, this
component is designed to provide
internal lateral bracing support off a
wall or structure. The strut can be cut
to length to provide variation in wall
clearance.
|
Gas Vent Terminal
Price: £18.17 (£21.80 Including VAT at 20%)
Made From Fabricated aluminium.
|
Ridge Tile Adaptor
Price: £18.58 (£22.30 Including VAT at 20%)
Designed to be used with any
approved ridge tile vent.
|
Seldek Flashing Flat - 45 Deg
Price: £16.19 (£19.43 Including VAT at 20%)
Type1
|
Storm Collar
Price: £7.38 (£8.86 Including VAT at 20%)
Aluminium Storm Collars are provided separately from
Flashings and should be fitted to the vent immediately above
the Flashing. The Collars are a tight fit to the vent and should
be sealed with the silicone sealant provided
|
