Healthcare Taps and Mixers Markwik 21

Armitage Shanks Healthcare Taps Markwik 21

Todays healthcare market is changing faster than ever. New NHS regulations demand higher levels of performance from equipment than ever before.
Armitage Shanks new Markwik range of thermostatic mixers eliminate the possible dead leg of warm water between the thermostat and the tap.
All of the following comply with HTM64,HTM04,HFN30 & HBN26 NHS guidelines

For quanity discounts please contact us.
Please check delivery times on these items before ordering

Markwik 21 Single Lever Mixer A4553AA
The single lever operates on/off temperature control and is suitable for high and low pressure systems.
Other features include, built in cleansing feature, easy to access strainers,filters and check valves,integral isolation valves and a down facing spout ensuring water drains away.

200mm Centres
Click here for Dimensions
Price: £302.00 (£362.40 Including VAT at 20%)

Markwik 21 Mixer with Electronic Proximity Sensor A4554AA
For use in areas where water saving benefits are a must.
The tap is activated by movement and proximity to sensor and stops immediately when they stop.
This mixer also has the cleansing feature which means it can be maintained without removing any access panels.
Price: £515.00 (£618.00 Including VAT at 20%)

Markwik 21 Mixer with Time Flow Sensor A4555AA
For medical/nursing procedure areas.
The tap is activated by moving a hand over the remote sensor and once on the water will run for a set length of time which is set up on installation.
This mixer also has the cleansing feature which means it can be maintained without removing any access panels.
Price: £515.00 (£618.00 Including VAT at 20%)

Markwik 21 Sequential Pillar Mixer A4803AA
Pillar mixer tap with integral thermostat single sequential lever, single flow fixed horizontal nozzle. Sequential operation ensures both hot and cold water is drawn on each use, long lever gives precise control. Insulated technology keeps the hot side of the mixer at a safe surface temperature. A safer alternative in refurbishments to older style swan neck versions.

"200mm centre tapholes
"Isolation/check valves
"Easy servicing
"No premixed water

Click here for Dimensions
Price: £349.85 (£419.82 Including VAT at 20%)

Armitage Markwik Taps S8265AA

Price: £190.00 (£228.00 Including VAT at 20%)

Ask Bob!

Can't find what you need?

Want some advice?

Ask Bob!

Find An Installer

locate a registered
Gas Safe or OFTEC
installer in your area