Pay securely online using SagePay Major credit cards accepted.
| Hot Water | Hot Water Heating | Unvented Water Heating | Heatrae Unvented Water Heaters
Multipoint is the market-leading range of small unvented water heaters. Our new range is quicker and easier to install with a wider choice of element ratings. It is supplied with a factory-fitted Temperature and Pressure Relief Valve and features a unique five-year inner container guarantee. Suitable for use with any standard mixer or tap . Accessories A range of accessories is available for installation with the Multipoint 10/15. These are supplied as 'Accessory Packs'. Pack U1 Pack U2 Pack U3 2.8mtrs (10) or 4.2mtrs (15) to the nearest cold draw off is required for expansion in pipework.If this is not possible pack U2 is needed.Click here for more information Fitted with 1 metre of 3-core cable Supplied with easy-fit wall-mounting bracket
As above but for up to 7 basins,Multipoint combines unrivalled quality and reliability with a unique five-year cylinder guarantee. Accessories supplied with all Multipoint 30/50 units include: easy-fit wall-mounting brackets; discharge funnel (tundish); combined pressure-reducing valve with built-in strainer; expansion vessel and fixing bracket(s); pressure relief (expansion) valve.
Heatrae Sadia's Hotflo range sets a new standard in value for money small unvented water heating. Hotflo can service up to three basins and incorporates a copper inner container, requiring no anode, to achieve optimum performance in terms of durability and corrosion resistance. To provide an added level of safety, Heatrae Sadia recommend the fitting of a separately available Temperature and Pressure Relief Valve on heaters of 15 litres and below, although this is not required under the latest British Standards. Accessories A range of accessories is available for installation with the Multipoint 10/15. These are supplied as 'Accessory Packs'. Pack U1 Pack U2 Pack U3
For use with Hotflo and Multipoint 10 and 15 litre. Combined Pressure Reducing Valve and Strainer. The Pressure Reducing Valve limits water pressure to 3.5 bar (50 psi). The Strainer filters coarse impurities from the water supply. Where Pack U1 is fitted, it MUST be used with either Pack U5 (Hotflo) or Pack U2 (Multipoint)
Expansion Vessel, Check Valve, Pressure Relief (Expansion) Valve The Expansion Vessel, when fully charged, will absorb all expanded water produced by the Multipoint heater during normal operation. The Check Valve prevents backflow of hot water and eliminates any possibility of cross-contamination between cold and hot water. The Expansion Valve, which opens at 6 bar (87 psi), acts as a back-up to the expansion vessel.
Thermostatic Blending Valve with Integral Check Valves and Strainers. The Blending Valve allows water to be stored at high temperatures and blended with cold water to a preset outlet temperature. This provides over-temperature protection, and is ideal for the control of Legionella and the extension of system capacities. Complies with BS 1415 part 2. Allows water to be safely stored above 60°C
Expansion Vessel & Check Valve Pack U5
Can't find what you need?
Want some advice?
locate a registered Gas Safe or OFTEC installer in your area
