Items: Value:
Search  |  Site Map
       

 | Domestic Heating | Heating Controls | Danfoss Randall Controls | Danfoss Timeclocks & Programmers | Danfoss Time Controls MK18

Danfoss Time Controls MK18

Danfoss
CP715 Si 2 Channel Programmer CP715 Si 2 Channel Programmer
The CP715 Si two-channel, common time base programmer has separate Heating and Hot Water outputs, allowing either service to run independently of each other, but sharing a common time base.

The CP715 Si can be configured by the installer at time of installation to provide 7 day, 24 hour, or 5 day/2 day operation and either 2 ON/OFF's or 3 ON/OFF's per day, allowing the time control to be tailored to match the specific requirement of the consumer.

Additionally the programmer can be set for either 'pumped' or 'gravity' hot water.

Price: £42.97 (£51.56 Including VAT at 20%)



FP715 Si 2 Channel Programmer FP715 Si 2 Channel Programmer
The FP715 Si two-channel full programmer has separate Heating and Hot Water outputs operating on completely independent time bases for maximum flexibility.

The FP715 Si can be configured by the installer at time of installation to provide 7 day, 24 hour, or 5 day/2 day operation and to provide either 2 ON/OFF's or 3 ON/OFF's per day, allowing the time control to be tailored to match the specific requirement of the consumer.

Additionally the programmer can be set for either 'pumped' or 'gravity' hot water.


Price: £46.20 (£55.44 Including VAT at 20%)



TS715 Si 2 Channel Programmer TS715 Si 2 Channel Programmer
The TS715 Si single channel electronic timeswitch provides voltage free output contacts making it an ideal solution for use with both line voltage and low voltage control circuits.

It is an ideal solution for combi-boilers, for systems having a common Heating and Hot Water zone, and for the control of additional heating zones.

The TS715 Si can be configured by the installer at time of installation to provide 7 day, 24 hour, or 5 day/2 day operation and either 2 ON/OFF's or 3 ON/OFF's per day, allowing the timeswitch to be tailored to match the specific requirement of the consumer.

Price: £36.50 (£43.80 Including VAT at 20%)



FP975 Programmer FP975 Programmer
The FP975 full programmer offers a direct plug-in replacement to the Danfoss Randall MK9 range (types 922 & 972), the Danfoss Randall SET5, or any other timeswitch or programmer based on the British Gas standard wallplate.

The FP975 is supplied complete with SET wallplates but is designed to also mount directly onto existing MK9 wallplates without the need for wiring changes. Each unit, which when supplied is configured as a SET replacement, can be re-configured as a MK9 replacement by means of a switch on the rear of the unit.

Price: £59.00 (£70.80 Including VAT at 20%)



view basket  checkout now

Ask Bob!
Ask Bob!

Can't find what you need?

Want some advice?

Ask Bob!

Find An Installer

   click here to find an OFTEC registered installer
locate a registered
Gas Safe or OFTEC
installer in your area